...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
This features allows the user to export desired data from a specific DATAmaestro Lake folder to any pre-existing DATAmaestro project A .dmff file is created with the desired subset of data (period, frequency, variables) stored in the DATAlake and uploaded (export) it to a specific DATAmaestro project or onto the user’s local drive.
Remark: Data from different DATAlake directories can be merged into a single export .dmff file and thus be used simultaneously for analysis in a DATAmaestro project.
To export :
...
Enter Interval, it defines desired data sampling frequency or data intervals, for example, a database which should have one value every hour should enter “1h” in this field. Other common period examples include:
...
Range (Shortcuts)
...
Description
...
1s
...
Extract data at 1 second intervals
...
5m
...
Extract data at 5 minute intervals
...
1h
...
Extract data at 1 hour intervals
...
7d
...
Extract data at 7 day intervals
Select Method, options: Snap, Average, Interpolation, Most probable, Minimum and Maximum values.
...
The average method calculates the weighted arithmetic mean which is based on the value and the duration of each value that spans the given period or time window. For more information on Method average please check below. The formula is:
which expands to
where wi are the weights (or durations) and xi are the values.
(1) Source: Average Wikipedia
...
Interpolation
...
Linear interpolation is a type of interpolation which generates new values based on an existing set of values. It is achieved geometrically by drawing a straight line between two adjacent points. If the known points are given by the coordinates (x0,y0) and (x1,y1) , the linear interpolant is a line between these points. For a value x in the interval (x0,x1), the value of y along the straight line is given from the equation of slopes (1). It is useful for continuous values. Moreover the interpolation method is only calculated if there is no recorded value at a time stamp.
(1) Source: Wikipedia - Linear Interpolation
...
Selects the single recorded value or class that has the longest duration for each Period or time window. If the same value or symbol appears twice, the durations are not accumulated.
...
Selects the highest/maximum recorded value for each Period or time window. If there is no record in the time window, last value is returned.
...
...
...
English us | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For more information, see the online learning platform This features allows the user to export desired data from a specific DATAmaestro Lake folder to any pre-existing DATAmaestro project A .dmff file is created with the desired subset of data (period, frequency, variables) stored in the DATAlake and uploaded (export) it to a specific DATAmaestro project or onto the user’s local drive. Remark: Data from different DATAlake directories can be merged into a single export .dmff file and thus be used simultaneously for analysis in a DATAmaestro project. To export :
Raw | max 128 columns
Download DMFF | Sampled |
Raw |
| tag names : max 200 kB
*: very unlikely to happen
To export a file directly to DATAmaestro Analytics:
Export Method: SnapThe snap methods samples by taking the last stored value within each time interval. In case there are no stored values within a given interval the snap method considers the last value stored. An instantaneous value at each time interval will be extracted, no aggregation is provided. This method is only available for backward compatibility. It is only useful if a previous extraction have been done with Snap method and the same result is needed. In other cases, Last and First methods should fill the needs and are simpler.Export Method: AverageThe average method calculates the weighted arithmetic mean which is based on the value and the duration of each value that spans the given period or time window. The table below shows how the snapaverage exported data is selectedcalculated.
Export Method:AverageThe average method calculates the weighted arithmetic mean which is based on the value and the duration of each value that spans the given period or time window. InterpolationLinear interpolation is a type of interpolation which generates new values based on an existing set of values. It is achieved geometrically by drawing a straight line between two adjacent points. It is useful for continuous values. Moreover the interpolation method is only calculated if there is no recorded value at a time stamp. (1) More information in Wikipedia - Linear Interpolation The table below shows how the average interpolation exported data is calculated.
Average Values | (Weighted) Average Formula |
30 | =(25*30+36*25)/55
33.167 | =(36*5+42*30+22*25)/60
24.167 | =(22*5+23*30+26*25)/60
27.083 | =(27*5+28*30+26*25)/60
Export Method: InterpolationLinear interpolation is a type of interpolation which generates new values based on an existing set of values. It is achieved geometrically by drawing a straight line between two adjacent points. It is useful for continuous values. Moreover the interpolation method is only calculated if there is no recorded value at a time stamp. (1) More information in Wikipedia - Linear Interpolation The table below shows how the interpolation exported data is calculated.*At 15:38:00, the interpolation method considers the previous value 36 at 15:37:35 and the next value 42 at 15:38:05. The new interpolated value is 41, calculated as follows: 36 + ((42-36)/30)*25. Export Method: Longest recordSelects the single recorded value or class that has the longest duration for each Period or time window. If the same value or symbol appears twice, the durations are not accumulated.
Export Method:Longest recordMinimumSelects the single lowest/minimum recorded value or class that has the longest duration for each Period or time window. If the same value or symbol appears twice, the durations are not accumulatedthere is no record in the time window, last value is returned.
Export Method:MinimumMaximumSelects the lowesthighest/minimum maximum recorded value for each Period or time window. If there is no record in the time window, last value is returned.
Export Method:MaximumLastSelects the highest/maximum last recorded value for each Period or time window. If there is no record in the time window, last value is returned.at or before a given time.
Export Method:LastFirstSelects the last first recorded value at or before after a given time.
Export Method: FirstSelects the first recorded value at or after a given time.
Export Method: SnapThe snap methods samples by taking the last stored value within each time interval. In case there are no stored values within a given interval the snap method considers the last value stored. An instantaneous value at each time interval will be extracted, no aggregation is provided. This method is only available for backward compatibility. It is only useful if a previous extraction have been done with Snap method and the same result is needed. In other cases, Last and First methods should fill the needs and are simpler. The table below shows how the snap exported data is selected.
To replace the existing datasource (all tasks will be automatically updated): in DATAmaestro Analytics, click on Load data in without changing the selected file in the drop down (Recommended). More than one data sources can complexify your project. Before creating a task, first you must select the data source. So, it is advisable to have only one data source in a project.
To add a new datasource to your project. It is possible to work with multiple datasources in a project, however each task can only use one datasource (no merging provided).
You have now added a second datasource to your project. Under the datasource icon, you will see two datasources.
|
Japanese | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
エクスポートこの機能では、特定の DATAlake ディレクトリ (=データベース/フォルダー) から任意の既存の DATAmaestro プロジェクトに任意のデータをエクスポートできます。.dmff ファイルは DATAlake に格納された任意のデータのサブセット (期間、頻度、変数) を使用して作成され、特定の DATAmaestro プロジェクトまたはユーザーのローカルドライブにアップロード (エクスポート) されます。 備考: 別の DATAlake ディレクトリのデータを 1 つのエクスポート .dmff ファイルにマージし、DATAmaestro プロジェクトの分析で同時に使用できます。 エクスポートする方法:
*: 発生確率が非常に低い Unix 時間を Excel 時間に変換 Unix 時間のタイムスタンプを Excel 時間に変換するには、次の式を使用します。 =((UNIXTIME/60/1000)/60/24)+DATE(1970;1;1)+(2/24) for GMT +02:00 ファイルを直接 DATAmaestro Analytics にエクスポートする
エクスポート方法: スナップスナップ法は、各間隔にある最後に格納された値を取得します。特定の間隔に格納された値がない場合、スナップ法では最後に格納された値が考慮されます。各間隔の瞬時値が抽出され、集約は行われません。 この方法は後方互換性の目的でのみ使用できます。スナップ法で前の抽出が実行され、同じ結果が必要な場合にのみ有効です。他の場合には、最後および最初法がニーズに適し、よりシンプルです。 次の表は、スナップエクスポートデータの選択方法を示します。
エクスポート方法: 平均 平均法は、値と、特定の期間または時間枠にある各値の期間に基づいて、加重算術平均を計算します。 次の表は、平均エクスポートデータの計算方法を示します。
エクスポート方法: 補間 線形補間は、既存の値セットに基づいて新しい値を生成する補間の種類です。2 つの隣接する点の間に直線を描画することで、幾何学的に実行されます。連続する値で有効です。さらに、タイムスタンプに記録された値がない場合にのみ、補間方法が計算されます。 (1) 詳細については、「Wikipedia - 線形補間」を参照してください。 次の表は、補間エクスポートデータの計算方法を示します。
* 15:38:00 では、15:37:35 時点の前の値 36 と、15:38:05 時点の次の値 42 が考慮されます。新しい補間された値は 41 です。これは次のように計算されます。 36 + ((42-36)/30)*25 エクスポート方法: 最確値 各期間または時間枠で最も頻繁に記録される値を選択します。数値または記号値では、最頻値は長期間計測された値です。
エクスポート方法: 最小値 各期間または時間枠で記録された最低/最小値を選択します。時間枠にレコードがない場合は、最後の値が返されます。
エクスポート方法: 最大値 各期間または時間枠で記録された最高/最大値を選択します。時間枠にレコードがない場合は、最後の値が返されます。
エクスポート方法: 最後 特定の時刻以前の最後に記録された値を選択します。
エクスポート方法: First 特定の時刻以降の最初に記録された値を選択します。
異なるサンプリング方法を組み合わせる 異なるサンプリング方法を組み合わせられることをご存知でしたか。左から属性を選択する前に、ここまたは上をクリックすると、方法を変更できます。 |
...